All of us at least once were annoyed by mouse clicking. It takes so many time to launch a command using a mouse – at first you have to atomize your attention to grope after a mouse on the table, then you need to find an icon on a toolbar, move a cursor on… Read More »
Have you ever experienced a situation when you’ve lost all your changes due to accidental blackout or due to any other reasons your work was lost? It is definately a headache for those who use computers. As you might know, Siemens NX doesn’t provide an ability for auto-save and it is not a… Read More »
In this article we will discover a way to paint all part faces/bodies in random colors. At first we should switch NX to the Random Color Display mode. Therefore go to File -> All Preferences -> Visualization, or simply press Ctrl + Shift + V. Under the Color/Font tab open the Random Color list of… Read More »
Today we will speak about the Create New command which located under the Assemblies tab. This command creates a new part file for the selected geometry. It considers a part of co-called ‘Top-Down Design Methodology’. Using this feature allows you to: Copy an existing geometry to a new part file; Create an empty part file;… Read More »
This article is dedicated to the descriptive part name style in NX. By default, NX uses the File Name as the descriptive part name, but it’s possible to change this setting.
If you create and analyze an assemblies in NX then you likely faced a situation, when you need to limit a constraint dimension between some values. By default, Siemens NX doesn’t provide a direct functionality for that, therefore one should find a “workaround” to implement the needed functionality.
This video shows the process of object exporting in Siemens NX.